Truck & Trailer Welding · Louisville, KYWelding & Fabrication,Repaired Or Built To Fit.
Repair a cracked bracket, reinforce a damaged part, or have a component built to fit the truck or trailer. Superior Truck & Trailer provides MIG, TIG, and stick welding in Louisville, KY on steel, aluminum, and stainless steel, with fabrication built around the job in front of us.
Truck can't come to us? Mobile welding comes to you.
Pick The Metal. Watch The Bead.
Steel, aluminum, and stainless each call for the right welding process, filler, setup, and heat control. Use the selector below to see how the approach changes by material, then let the actual repair or fabrication job determine the final process.
MIG on steel
A wire-fed torch that lays a smooth, fast bead. It's the everyday process for steel brackets, mounts, bumpers and frame-side repairs.
Bumpers, hitches, brackets and racks built from steel.
Built For The Job The Truck Does.
From a damaged bumper to a part that has to fit an existing truck or trailer, fabrication starts with measurements and the way the component needs to work. The module below shows the custom pieces and fabrication work handled through the shop.
Custom Bumpers
A bumper built for the way the truck works: heavier where it takes hits, cut to clear what's mounted up front, and welded to the brackets that carry it.
- Plate cut to the truck's width and shaped to clear the hood and steps
- Brackets built to meet the frame's mounting points
- Openings for lights, tow points and anything mounted up front
- Year, make and model of the truck
- What's mounted up front now
- Whether it's replacing a damaged bumper
Where should it get done? Pick one
3816 Bishop Lane. Bigger builds and anything that needs the truck inside get done in the bay, less than a mile from I‑264.
Mobile welding. If the truck can't come to the shop, the team brings the equipment and does the welding or fabrication where it sits.
Call (502) 789-6644Measured, Welded, Back To Work.
We measure the repair or fabrication need, choose the material and welding process, complete the weld or build, then check fit and finish before the truck or trailer goes back to work.
Tell us what needs welding or building, the metal if you know it, and where the truck is sitting.
At the shop on Bishop Lane, or on site with mobile welding if the truck can't come to us.
MIG, TIG or stick, matched to the metal and the job, on steel, aluminum or stainless.
The repair or the new part is on the truck and the truck is back on its route.
The work happens here, on the road and in the bay.
The trucks, trailers, service vehicles, roadside calls and shop work behind the services on this site. This is the kind of commercial equipment Superior works on every day in and around Louisville.
The Work Holds Up.Customers Notice.
Welded It On?We Wire It Up Too.
A fabricated part can be only one piece of the repair. If the job also needs another truck or trailer service shown in the grid, the same Superior shop can keep the work moving without sending you to a different provider.
Before The Arc Starts, Here Is What To Know.
Quick answers about welding processes, metals, welded repairs, custom fabrication, fit, and how to start a welding or fabrication job at the Louisville shop.
(502) 789-6644What kind of welding do you do?
Superior Truck & Trailer provides MIG, TIG, and stick welding for truck and trailer work. The process used depends on the material, joint, access, thickness, and what the repair or fabrication job requires.
What metals can you weld?
Superior Truck & Trailer welds steel, aluminum, and stainless steel for truck and trailer repairs and fabrication. The material and condition of the part help determine the process and repair approach.
Can you repair a cracked or broken truck or trailer part?
Yes, when the part and repair are suitable for welding. The shop needs to see the material, damage, access, and how the component is used before confirming the repair method.
Can you fabricate a part that does not come off the shelf?
Yes. Custom fabrication can be used when a truck or trailer needs a component built to fit the application. The final build depends on the measurements, material, mounting points, and function the part needs to serve.
Can you build or repair custom bumpers?
Yes. Custom bumpers are one of the custom builds the shop handles. The shop can determine what can be repaired, reinforced, or built after reviewing the truck, the existing bumper or mounting points, and the requested fit.
How do you choose between MIG, TIG, and stick welding?
The welding process is chosen based on the material, thickness, joint design, access, and the repair or fabrication need. Different jobs call for different heat control, filler, and setup, so the process should match the work rather than be chosen by name alone.
Do I need measurements or drawings before I call?
No. Start by telling the shop what is broken or what needs to be built. Superior can tell you what measurements, photos, drawings, or other job information are needed before the work is scheduled.
Where can I get truck and trailer welding near Louisville, KY?
Superior Truck & Trailer provides truck and trailer welding and fabrication at its Louisville, KY shop for commercial trucks and trailers from the surrounding Kentucky and Southern Indiana counties. Call with the repair or fabrication need so the team can help determine the next step.
Something Broke Or Doesn't Fit? Get It Welded.
Need a welded repair or custom fabrication in Louisville, KY? Call Superior Truck & Trailer with the truck, trailer, broken part, or fit problem so the team can determine what information is needed and schedule the work.
(502) 789-6644